上海赞国自动化科技有限公司全新原装，质量保证，保修一年，价格合理，“假一罚十”一直是我公司的主动承诺。

联 系 人：黄小姐 （销售工程师）
24小时销售技术服务热线：15021045968
电话（ Tel ）： +86-021-31129605
传真（ Fax ）： +86-021-67633621
邮箱（ Email ）：237741731 @qq.com
腾讯 ( Q   Q):237741731
-----------------------------------------
品牌：西门子

产地：德国

包装：全新未开封
 

规格：原装正品

上海赞国自动化有限公司是一家专业从事工业自动化控制设备的贸易型企业，主要经营西门子变频器，可编程控制器PLC、低压电器、编程电缆、电源;西门子称重模块及传感器7MH，压力变送器7MF,物位变送器7ML，温度变送器7NG，流量变送器7ME，PLC6ES7,人机界面，电线电缆6XV，电源6EP,连接器6ES,通讯网卡6GK,工业以太网卡6GK，交换机6GK

产品广泛应用于全国各地，如：钢铁厂、石油厂、化工厂、水泥厂、啤酒厂、冶金厂、造纸厂、电力、水利水电、机械等各种不同的工业部门系统需要。

【产品名称】

【产品型号】 西门子主机6ES7416-3XR05-0AB0

【产品产地】 德国西门子

【产品简介】 SIMATIC S7-400，CPU 416-2DP： 5.6MB（2.8MB代码，2.8MB数据），位处理速度30ns，集成接口：1. MPI/DP, 2. PROFIBUS DP

【产品质保】本公司产品质量按西门子原厂质量标准，产品质保一年，按西门子原厂包装标准，西门子原装正品，按厂家执行标准，需方收到货后七日内可提出异议！！！

【产品图片】 

西门子CPU416-3

订货号：西门子主机6ES7416-3XR05-0AB0

       西门子主机6ES7416-3XR05-0AB0

【产品概述】

erview

• 高端性能范围内的高性能 CPU
• 适用于对性能要求很高的工厂
• CPU 416-3 PN/DP 中集成了 PROFINET 功能

Area of application

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the 6ES7 964-2AA04-0AB0 interface submodule may be used.

Design

Both CPUs are equipped with the following:

• Powerful processor: 
  The CPUs achieve instruction execution times as low as 0.03 ?s per binary instruction.
• CPU 416-2: 5.6 MB RAM (of which 2.8 MB each for program and data); 
  CPU 416-3: 11.2 MB RAM (of which 5.6 MB each for program and data); 
  CPU 416-3 PN/DP: 11.2 MB RAM (of which 5.6 MB each for program and data); 
  fast RAM for parts of the user program relevant to execution.
• Flexible expansion: 
  Up to 262144 digital and 16384 analog inputs/outputs.
• Multi-point interface MPI: 
  With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
• Mode selector switch: 
  Designed as toggle switch.
• Diagnostics buffer: 
  The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.
• Real-time clock: 
  The date and time are appended to diagnostic messages of the CPU.
• Memory card: 
  For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available
• Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3): 
  The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming). 
  Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

• A module slot: 
  An additional PROFIBUS DP master system can be connected via the IF 964-DP interface module.

CPU 416-3 PN/DP additionally includes:

• PROFINET interface with 2 ports (switch):
  • PROFINET I/O, 256 IO devices connectable
  • PROFINET CBA

Functions

• Block protection: 
  A password concept protects the user program from unauthorized access.
• Integral HMI services: 
  The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
• Integrated communications functions:
  • PG/OP communication
  • Shared data communication
  • S7 standard communication
  • S7 communication
• Firmware update using network

CPU 416-3 PN/DP additional:

• Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
• Distributed intelligence in Component Based Automation (CBA) on PROFINET
• Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

• Multi-point interface MPI:
  • Definition of station addresses.
  • Startup/cycle behavior
  • Stipulation of the maximum cycle time and communications load
• Address assignment: 
  Addressing of I/O modules.
• Retentive ranges: 
  Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
• Size of the process image, local data.
• Length of the diagnostics buffer
• Protection level: 
  Definition of access authorization for program and data
• System diagnostics: 
  Definition of the handling and scope of diagnostic messages
• Timed interrupts: 
  Setting of periodicity

CPU 416-3 PN/DP additional:

• PROFINET interface
• Parameterization of time synchronization using NTP procedure

Indication and information functions

• Status and error indicators: 
  LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example
• Test functions: 
  The programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components
• Information functions: 
  The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories
• 
  

• 西门子PLC S7-400订货号