上海东仙电子供应斯洛伐克减速机H Series

商品详情

TECHNICAL SPECIFICATIONS

H series features

Case	Threaded and through holes in case
Input flange connection	Completely sealed reduction gear
Input shaft design	Input shaft is offered in the following versions: a) hollow shaft b) according to special request
Installation and operation characteristics	Hollow-shaft reduction gears have a large hole in the input shaft allows cables, tubes or an additional shaft to pass through the reduction gear. Suitable for applications where the rotation of the input shaft is achieved by using a tooth belt or a similar arrangement.

H series ordering specifications

Name	Size	Ratio	Series version	Shaft version
Name	Size	Ratio	Series version	H	S
TS	70	75	H	13	?
	140	69, 115	H	36	?
	170	69, 125	H	42, 46	?
	200	63, 125	H	52, 56	?
	220	55, 125	H	62, 65	?

Note: An example of an ordering code of a modified H series TwinSpin reduction gear with a motor flange: TS200 – 125 –H– H56 – M235 – P231. The markings M235 and P231 for a specific modification are defined by the manufacturer.

H series rating tables

Size	Reduction ratio	Shaft inside diameter	Rated output torque	Acceleration and braking torque	Permissible torque at emergency stop	Rated input speed	Cycle effective speed 5)	Max. allowable input speed10)	Tilting stiffness 1)6)	Torsional stiffness 1)7)	Max. no-load starting torque 9)	Max. back driving torque 9)
	i	d	TR [Nm]	Tmax [Nm]	Tem [Nm]	nR [rpm]	nef[rpm]	nmax [rpm]	Mt[Nm/arcmin]	kt[Nm/arcmin]	[Nm]	[Nm]
TS 70	75	13	50	100	250	2000	2500	5500	35	7,5	0,14	13
TS 140	69	36	200	500	1000	2000	1200	3500	340	55	1,6	110
	115							4500			1,5	130
							1300
TS 170	69	42	420	1050	2100	2000	1000	3200	1100	110	2,5	180
		46		825	1650
	125	42		1050	2100		1300	3700			2,2	240
		46		825	1650
TS 200	63	52	712	1780	3560	2000	1000	2700	2000	200	4	250
		56		1100	2200
	125	52		1780	3560			3700			3	300
		56		1100	2200
TS 220	55	62	1100	2750	5500	2000	700	2400	2400	290	5	170
		65		2000	4000
	125	62		2750	5500		900	3400			3	350
		65		2000	4000

RIGHT TO CHANGE WITHOUT PRIOR NOTICE RESERVED

1/ Mean statistical value. For further information see chapter Torsional stiffness, Tilting stiffness.
2/ Load at output speed 15 rpm.
3/ Tilting moment Mc max value for Fa=0. If Fa ≠0, see chapter Tilting moment.
4/ Axial force Fa max value for Mc=0. If Mc≠0, see chapter Tilting moment.
5/ The effective speed can also be higher for lost motion bigger than 1 arcmin and for low values of oil viscosity. For lost motion lower than 0,6 arcmin please consult the effective speed with the manufacturer.
6/ The parameter depends on the version of the high precision reduction gear.
7/ The parameter depends on the version of the high precision reduction gear, ratio and lost motion.
8/ The values of the parameters are informative. The exact value depends on the specific version of the high precision reduction gear.
9/ Temperatures of the high precision reduction gear lower than 20°C will cause higher no-load starting or back driving torque.
10/ Depends on the duty cycle; a higher input speed may be still possible, please consult at manufacturer.

The ratios highlighted in bold are recommended by SPINEA as optimal versions in terms of price and delivery.